Intel 413808 I/O Developer'S Manual Download Page 131

Page: 131 / 824

Intel

413808 and 413812 I/O Controllers in TPER Mode

October 2007

Developer’s Manual

Order Number: 317805-001US

131

Address Translation Unit (PCI-X)—Intel

413808 and 413812

2.11.2

PCI-X Interface Status Reporting

The following registers are located in the configuration space header and extended

space and provide status (error conditions) of the PCI Interface.

Note:

Registers or bits within a register that are described in

Table 20

and

Table 21

exist in

each function independently.

Table 21. PCI-X Host Interface Status Reporting Usage

a. This table is referring to only enabled functions. And in root complex mode multi-function is not applicable.

Usage

ATU Status Register - ATUSR

Bit 15 - Detected Parity Error

Address and Attribute parity error is

reported to all functions

simultaneously.

Data parity error is reported to only

the function involved.

Bit 14 - SERR# Asserted

SERR# Asserted is reported to only

the function involved.

Bit 13 - Master Abort

Master Abort is reported to only the

function involved.

Bit 12 - Target Abort (Master) Target Abort (Master) is reported to

only the function involved.

Bit 11 - Target Abort (Target) Target Abort (Target) is reported to

only the function involved.

Bit 8 - Bit Master Parity Error Master Parity Error is reported to only

the function involved.

ATU

PCI-X Status Register - PCIXSR

Bit 29 - Received Split

Completion Error Message

Received Split Completion Error

Message is reported to only the

function involved.

Bit 19 - Unexpected Split

Completion

Unexpected Split Completion is

reported to only the function

involved.

Bits[15:8] - Bus Number

Bits[7:3] - Device Number
Bits[2:0]

Each function indicates its function

number.

ATU

ECC Control and Status Register -

ECCCSR

Bits[27:2]

Address and Attribute ECC error is

reported to all functions

simultaneously.

Data ECC error is reported to only

the function involved.

Summary of Contents for 413808 I/O

























































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 413808 I/O

Reviews:

Brands by name

Popular brands

Intel 413808 I/O, Developer'S Manual

Search results

Summary of Contents for 413808 I/O

Reviews:

Brands by name

Popular brands