Intel 413808 I/O Developer'S Manual Download Page 116

Page: 116 / 824

Intel

413808 and 413812—Address Translation Unit (PCI-X)

Intel

413808 and 413812 I/O Controllers in TPER Mode

Developer’s Manual

October 2007

116

Order Number: 317805-001US

2.7.9.1.2

Inbound Read Request

When operating in the Conventional mode, the following actions with the given

constraints are performed by the ATU when a master abort is detected by the internal

initiator interface during an inbound read transaction:

• Set the Internal Bus Master Abort bit (bit 7) in the ATUISR

• Return a target abort condition to the initiating master during the delayed

completion cycle on the PCI bus. No data is ever read from the internal bus and

returned to the PCI bus.

The following additional actions with the given constraints are performed by the ATU

when a target abort is signaled by the PCI interface during an inbound delayed read

completion cycle:

• Set the Target Abort (target) bit (bit 11) in the ATUSR.

• When the ATU PCI Target Abort (target) Interrupt Mask bit in the ATUIMR is clear,

set the PCI Target Abort (target) bit in the ATUISR. When set, no action.

• Flush the transaction that was master aborted from the ITQ after the target abort is

delivered on the PCI interface.

When operating in the PCI-X mode, the following actions with the given constraints are

performed by the ATU when a master abort is detected by the internal master interface

during an inbound split read transaction:

• Set the Internal Bus Master Abort bit (bit 7) in the ATUISR.

• Generate a Split Completion Error Message (with message class=2h - completer

error and message index=80h - 4138xx internal bus master abort) on the PCI bus.

• When the Initiated Split Completion Error Message Interrupt Mask in the ATUIMR is

clear, set the Initiated Split Completion Error Message bit in the ATUISR. When set,

no action.

• Flush the transaction that was master aborted.

Note:

This split completion error message includes a device specific message index. The error

handler would need to have knowledge of the device specific error messages of the

4138xx in order to fully diagnose the problem.
The Internal Bus Master Abort bit is non-maskable and always results in an interrupt

being driven to the core processor.

Summary of Contents for 413808 I/O

























































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 413808 I/O

Reviews:

Brands by name

Popular brands

Intel 413808 I/O, Developer'S Manual

Search results

Summary of Contents for 413808 I/O

Reviews:

Brands by name

Popular brands