![background image](http://html1.mh-extra.com/html/insportline/em-3231/em-3231_user-manual_2068958013.webp)
e. Go back to
point b of Step 4.
to fully tighten
Bolt (98)
and
Nut
(109)
.
f. Repeat the above assembly process
on the left side.
g. Refer the drawing on the left side, before fully secure four pcs
Nuts (M8)(109)
that attach to the
Upright Post Assembly (4)
and
Main Frame (1)
, gently adjust the
Upright Post Assembly
(4)
‘s direction until the distance between the
Main Frame (1)
and both inner side of the
Pedal Support Arm (11)
are the
same.
h. Then fully secure four pcs
Nuts (M8)(109)
that attach to the
Upright Post Assembly (4)
and
Main Frame (1).
i. Slide the
Upright Sleeve (25)
down until it meets the
Main
Frame (1).
STEP 5
– PIVOTING ARM COVER & HANDRAIL BASE COVER ASSEMBLY
USE HARDWARE KIT
B
a. To assemble the
Pivoting Arm Cover (40,
41)
, place the
Left Pivoting Arm Cover (40)
at the inner side of the
Pivoting Arm (9)
.
Place the
Right Pivoting Arm Cover (41)
at
the outer side of the
Pivoting Arm (9)
. Bolt
the
Pivoting Arm Cover (40, 41)
with two
Self-Tapping
Screws,
Flat
Head
(M4x16mm)(88).
b. To assemble the
Handrail Base Cover (42,
43)
, place the
Left Handrail Base Cover
(42)
at the inner side of the
Telescoping
Bar (10)
. Place the
Right Handrail Base
Cover (43)
at the outer side of the
Telescoping Bar (10)
. Bolt the
Handrail
Base Cover (42, 43)
with two
Self-Tapping
Screws,
Flat
Head
(M4x16mm)(88)
.
Repeat the above assembly process
on the
left side.
STEP 6
– PEDAL ASSEMBLY
a. Place the
Right Pedal Assembly (50R)
onto the
pedal arm plate
that is located on the top of the
Right Pedal Support Arm (11)
and secure with two
Lock Washers (M8)(79)
and two
Screws,
Round Head (M8xp1.25x16mm)(93).
b. Repeat the above assembly process
on the left side.
Summary of Contents for EM-3231
Page 7: ...108 Nut M6 4 pcs...
Page 48: ...PRODUCT PARTS DRAWING A...
Page 49: ...PRODUCT PARTS DRAWING B...