![background image](http://html1.mh-extra.com/html/insportline/em-3231/em-3231_user-manual_2068958009.webp)
THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY:
SOCKET
WRENCH
(13mm)
PHILLIPS
SCREWDRIVER
(6mm)
ALLEN WRENCH
(5 mm )
WRENCH
(10 & 17mm)
COMBINATION
WRENCH
ASSEMBLE INSTRUCTIONS
STEP 1
– STAND & STABILIZER ASSEMBLY
USE HARDWARE KIT
A
a. Attach the
Stand (127)
to the middle of the
Main Frame’s base (1)
. At this stage, adjust the
Stand (127)
until it meets the base of the Main Frame.
NOTE:
The purpose of adjust the
Stand
(127)
is to level the item and get more support for the base on the Main Frame. After finishing all
assembly process, place the item on a flat surface. Adjust the
Stand (127)
until the item sets on
the floor without rocking.
b. Identify the correct direction of the
Front Stabilizer (2)
, there is an “R” decal on the right side of
the
Front Stabilizer (2).
c. Attach the
Front Stabilizer (2)
to the
Main Frame (1)
.
NOTE:
“Small Tip: Attach screws and bolts to the assembly parts first before secure”
To assemble the
Front Stabilizer (2)
to the
Maine Frame (1)
with more efficient and easy way, it
is suggested to attach
two
Lock Washers (M8)(79)
, two
Washers (8x16x2.0t)(80)
and two
Bolts,
Summary of Contents for EM-3231
Page 7: ...108 Nut M6 4 pcs...
Page 48: ...PRODUCT PARTS DRAWING A...
Page 49: ...PRODUCT PARTS DRAWING B...