![background image](http://html1.mh-extra.com/html/insportline/em-3231/em-3231_user-manual_2068958010.webp)
Socket Head (M8xp1.25x90mm)(105)
to the
Front Stabilizer (2)
and the
Maine Frame (1)
first
before fully secure.
**Please do not secure the bolts unless you make sure Bolts all go into
screw holes of Front Stabilizer and Main Frame**
d. Fully secure
two
Lock Washers (M8)(79)
, two
Washers (8x16x2.0t)(80)
and two
Bolts, Socket
Head (M8xp1.25x90mm)(105)
that attach to the
Front Stabilizer (2)
to the
Main Frame (1).
e. Follow the above STEP b. to attach the
Rear Stabilizer (3)
to the
Main Frame (1)
with two
Lock
Washers
(M8)(79)
,
two
Washers
(8x16x2.0t)(80)
and
two
Bolts,
Socket
Head
(M8xp1.25x90mm)(105).
STEP 2
– UPRIGHT POST ASSEMBLY
Please don
’t fully secure Nut (M8) (109) until
point h of Step 4.
NOTE:
For shipping purpose, four pcs
Nuts (M8)
(109)
are attached on the top of the
Main Frame
(1)
.
a. Remove four pcs
Nuts (M8) (109)
from the
top of the
Main Frame (1)
and place them on
the safety place for following assembly
process.
b. Slide the
Upright Sleeve (25)
onto the
Upright Post Assembly (4) Be care not to
pinch the wires.
c. Slightly attach the
Upright Post Assembly
(4)
to the
Main Frame (1)
and slightly secure
with four pcs
Nuts (M8)(109). NOTE: Please
don’t fully secure Nut (M8) (109) until
point h of Step 4. is complete (Page 9).
d. Connect the
Rear Connection Wire (115A)
to the
Motor Wire (118). Be care not to
pinch the wires.
e. Connect the
Rear Connection Wire (115B)
to the
Adaptor Connection Wire (116). Be
care not to pinch the wires.
f.
Connect the
Rear Connection Wire (115C)
to the
Sensor Wire (119)
.
Be care not to
pinch the wires.
NOTE:
After connect the wires, slightly and gently pull two sides of wires to test and make sure
whether the wires are fully connected
Summary of Contents for EM-3231
Page 7: ...108 Nut M6 4 pcs...
Page 48: ...PRODUCT PARTS DRAWING A...
Page 49: ...PRODUCT PARTS DRAWING B...