Page 18
EN
Chapter 4 Assembly and function
Hose holder
• For rapidly fixing hoses to the
scaffold
Item no.
10018503
inoCOLL one-handed gun
• For bonding and basecoat mortars
• Whip hose 2 m, Ø 19 mm with an LW 24 mortar connection coupling suitable for a 25 mm
mortar hose
• For particle sizes up to 1.5 mm
Item no.
10024144
inoCOLL PRO one-handed gun
• For applying reinforcing mortar and finishing plaster up to 4 mm particle size
• Operating pressure: up to 40 bar
Item no.
10041950
Spray attachment for inoCOLL / PRO one-handed gun
• For spraying mineral and paste-like products
• With 10 mm nozzle
Item no.
10039322
Short spray pipe with mortar coupling 25 mm
Short, lightweight spray pipe with L24 coupling for spraying paste-like materials. Thanks to the special
nozzle geometry, a small compressor (air flow rate from 200 l/min.) is sufficient to achieve a very good
spray pattern.
The air quantity can be regulated using the integrated mini ball valve.
• For particle sizes up to 3 mm
• Suitable for a 25 mm mortar hose
Scope of delivery:
Short spray pipe with 2 m whip hose (Ø 19 mm), with mortar coupling 25 mm and 2 m air hose with
GEKA coupling, without nozzles
Item no.
10039887
Nozzles for:
- Spray attachment for inoCOLL / PRO one-handed gun
(10039322)
- Short spray pipe with mortar coupling 25 (10039887)
- Angled spray head with GEKA coupling (10039457)
• Made from stainless steel
* For particle sizes up to 6 mm
Ø
4 mm
5 mm
6 mm
8 mm
10 mm
13 mm*
Item no.
10039271
10042461
10039220
10039221
10039222
10040941
MAI finishing coat device,
straight
• With 25 mm M-piece coupling
• Including a 14 mm jet nozzle
Item no.
10024362
First aid set for plastering machines in the systainer
Scope of delivery:
Sealing systems for coupling (5 x 25 mm & 2 x 35 mm), fine plaster nozzles
(each 2 x 12 mm & 14 mm), 5 x GEKA sealing system with beaded edging (1 x 1” IT, 2 x 1/2” nozzle,
1 x 3/4” IT, 2 x 3/4” nozzle), 1 x GEKA 1/2” injection nozzle, 1 x special assembly lubricant spray
(400 ml can), 2 x cam levers with lock ring, plaster piece (each 1 x 25 V part & 35 M-piece with GEKA
coupling), 2 x combination wrenches (19 mm), hose clamps (each 5 x 1/2” & 3/4” clamping range),
1 x screwdriver for slotted screws, sponge balls (5 x 30 & 2 x 45 mm RG250), 5 x clamping sleeves
(6 x 30), 1 x pin punch (5 mm), 1 x keyhole saw (5 mm).
Item no.
10043925
