Page 20
EN
Chapter 4 Assembly and function
Sponge balls (firm version)
• For cleaning material / mortar hoses
Ball
Ø
30 mm
45 mm
Hose
Ø
25 mm
35 mm
Item no.
10008116-007
10008116-008
INOTEC Compact C 330 PP compressor, 230 V including pressure switch
The compact 230 V compressor is excellently suited to a multitude of applications, such as spraying
decorative coats, plasters, etc.
Technical data:
Operating pressure:
10 bar
Suction capacity:
330 l/min
Output:
2.05 kW
Dimensions (L x W x H):
396 x 473 x 598 mm
Weight:
approx. 32 kg
Item no.
10041150
* as auxiliary
compressor
Handy K2 compressor, 400 V, with pressure switch
Mobile, universal use diaphragm compressor for the production of oil-free compressed air. Used in
many mixing pumps due to its low maintenance and compact design.
Technical data:
Operating pressure:
5.5 bar
Suction capacity:
250 l/min
Output:
0.9 kW
Dimensions (L x W x H):
495 x 165 x 340 mm
Weight:
23.5 kg
Item no.
10023102
KAESER 230 V Compressor Premium Car 450/30W - with pressure switch
The compact 230-volt compressor is ideal for many applications, such as spraying decorative coatings,
plaster or bitumen, for operating compressed air tools, and for painting, etc.
Technical data:
Operating pressure:
10 bar
Suction capacity:
450 l/min
Output:
2.2 kW
Dimensions (L x W x H):
870 x 560 x 590 mm
Weight:
86 kg
Item no.
10039227
* as auxiliary
compressor
Injection hood inoCOMB M4G / Maxi Power / G4
consisting of:
• Injection hood
• Rotor sensor
• 50 m control cable for rotor sensor
Item no.
10044221
Mobile delivery system for inoTRANS FF 140
corrosion-resistant (galvanised & powder-coated) free-fall silos
Technical data:
Operating voltage: 400 V / 50 Hz
Nominal rating: 7.5 KW
Fuse: 25 A
Dimensions (L x W x H): 1,220 x 650 x 625 mm
Suction capacity: approx. 140 m³/h
Conveying vessel volume: 70 l
Dimensions: 800 x 540 x 910 mm
Weight of compressor (dry rotor, oil-free with additional air filter), frame and switching cabinet: 208
kg, weight of the conveying vessel: 88 kg
Scope of delivery:
Conveying system, conveying vessel (maintenance-free), rotary compressor, con-
necting hose approx. 3 m with GEKA coupling
The conveying vessel of the
inoTRANS FF 140
mobile conveying system is docked directly to the
free-fall silo with quick-release fasteners. Approximately 70 litres of material flows through the open
shut-off valve into the conveying vessel, where it is mixed with air and conveyed dust-free at a force
of 1.4 bar through a conveyor hose to the mixing pump. Here the material is mixed with water and
then pumped on-site. A level probe in the mixing pump tank monitors the level and ensures automatic
replenishment.
Areas of application:
Suitable for gypsum, lime and cement plasters
Item no.
10044217
