Page 6
EN
Chapter 2 Safety
1.3.3.2 Warranty claims
Claims apply only where material or manufacturing faults
exist and where machinery has been used properly. Wear
parts are not covered by the warranty. All claims shall be-
come void if third-party parts are installed, where the ma-
chinery has been improperly used or stored and in the event
of obvious non-compliance with the operating manual. In
this connection, we refer you to our General Terms of Busi-
ness.
1.3.4 Carrying out repairs
Repairs may only be carried out by employees at our
INOTEC service centres.
2 Safety
2.1 Intended use
You may only operate this machine if the following
conditions are met:
• The inoCOMB Maxi Power is suitable for mixing,
conveying and spraying all factory pre-mixed and
machine-compatible mortars. The machine can be fed
with powdery material from bags, one-way containers
(with the dry conveying unit
inoFLEX Mono), big bags (with the Big-Bag-Box Mono)
or silos (with a conveyor system).
• The material is pumped in mortar hoses to the pro-
cessing location, where it is applied to or poured into
walls, ceilings or flooring by means of the appropriate
spray guns or glue guns.
• Only use the machine within its limits of application
and according to the technical data.
• Pay particular attention to the safety and warning
notices outlined in this original operating manual.
!
DANGER
Failure to use the
inoCOMB Maxi Power properly could put the user’s
life and limb at risk and damage the inoCOMB Maxi
Power or other assets.
!
WARNING
Danger due to misuse!
Misuse of the inoCOMB Maxi Power may lead to dan-
gerous situations.
• Never use the inoCOMB Maxi Power mixing pump to cre-
ate other products, such as food.
• Never operate the inoCOMB Maxi Power mixing pump
using values out of the ranges specified in the “Technical
Data”.
