Page 30
EN
Chapter 5 Transport and storage
5 Transport and storage
5.1 Safety notices for transport
!
DANGER
Slipping machine
Danger of death for drivers and transport users.
• Ensure that the machine is in a secure position during
transport.
• Secure the machine against slipping.
• Choose a means of transport that has sufficient load
capacity.
NOTE
The inoCOMB Maxi Power can be trans-
ported as a complete machine or broken down into
individual segments.
• The inoCOMB Maxi Power is equipped with four
wheels. Convenient handles are fitted at all four corners
for moving the whole machine.
• When transporting the machine in individual segments,
the mixing zone, the frame with material hopper, the
compressor and, if necessary, the star feeder can be
transported separately.
• If a lifting device is used for transport, the attachment
points provided for this purpose must be used.
The attachment points are marked with this pictogram.
!
WARNING
Risk of injury posed by carrying or lifting
machine
• The machine weighs over 250 kg. To prevent overload-
ing and damaging the spine, at least 4 people must
move the machine.
5.2 Transport inspection
NOTE
Check the machine to ensure that all
components are present and for transport damage
immediately upon receipt.
• Do not leave any parts in the packaging.
5.3 Damage report
Proceed as follows in the event of externally visible
transport damage:
1. Write a damage report with the following details:
- Your client address
- Name of the transport company and the driver
- Date and time of the delivery
- Order number and machine name
according to the delivery note
- Description of the damage
- Signature of the driver
- Signature of the recipient at the customer’s premises
2. Have the transport damage confirmed by means of the
driver’s signature.
3. Send one copy of the damage report to the transport
company and another to Inotec GmbH.
4. And clarify the possible ways in which the damage
could be remedied with one of our service centres (see
second last page)
5.4 Complaints
Claims for compensation relating to transport damage can
only be made if the delivery company is informed of the
same without undue delay.
5.5 Packaging
The new machine will be shipped cellophane-wrapped on
a Euro pallet.
• Dispose of the packaging material as required by law.
