Page 17
EN
Chapter 4 Assembly and function
4.7 Accessories
The following accessories can be supplied for the inoCOMB Maxi Power.
Water/air hose
• For universal use, e.g. air, water
• GEKA couplings crimped with sleeves on both sides
Technical data:
Max. operating pressure:
15 bar
Temperature range:
-20 up to +90°C
Ø
1/2”
1/2”
1/2”
3/4”
Length
10 m
15 m
20 m
20 m
Item no.
10022000
10022001
10022002
10022011
Ultralight hose
- with mortar coupling
Ø
25 mm
Length
10 m
Item no.
10043874
INOTEC mortar hose
• Abrasion-resistant special hose for pumping
highly pressurised wet mortar; largely kink-proof
• For an operating pressure of 40 bar with 3 times
the reliability
• Yellow on the outside: less heat builds up in the
event of sun exposure
• With mortar hose, M-piece couplings and
rotating V-piece (only at Ø 25 mm)
• With cam levers on the M-piece
Technical data:
Operating pressure:
40 bar
Bursting pressure:
120 bar
Ø
25 mm
25 mm
25 mm
35 mm
35 mm
Length
10 m
15 m
20 m
10 m
20 m
Item no.
10008346-001
10008346-002
10008346-003
10022032
10008346-007
Flushing hose
• For clearing blockages in mortar hoses
Length
10 m
Item no.
10024385
400 V / 5 x 4 mm² extension cable
• 32 A plug and socket
Length
20 m
Item no.
10015201
Remote control cable with remote control switch
Length
16 m
32 m
Item no.
10042464
10042465
Remote control extension cable without remote control
switch
• For remote control cable
• For remote control switch
• For inoCOLL one-handed gun
Length
16 m
32 m
Item no.
10015210
10042463
Remote control switch
• With 0.2 m cable, indicator light and 4-pole
Harting plug
Item no.
10015134
Plastic starting hose connector
with V Part 35
Ø
35 mm
Length
0.3 m
Item no.
10038433
