57
InnoMedia, Inc
.
All Right Reserved
INFO: write to NVS_SECONDARY (0x9d5)
INFO: write to NVS_PRIMARY (0x9d5)
FS write: OK.
OK
Please reboot the system!!
Configuring NAT Bandwidth (N, 7)
Use the "
N, 7
" command to configure the NAT Bandwidth based on your broadband
Internet connection.
SAMPLE:
N
Enter 1 to configure PPPoE Setting
Enter 2 to configure DHCP Server setting
Enter 3 to configure Port mapping setting
Enter 4 to show DHCP server leasing information
Enter 5 to configure IP filter
Enter 6 to configure MAC cloning
Enter 7 to configure NAT Bandwidth
Enter 8 to configure DMZ
Enter l to configure link setting
7
The bandwidth control is Modifiable
The bandwidth control is Disabled
TCP MSS control for data packet is disabled
Do you want to change it? (y/n)
y
Do you want to make the bandwidth control NOT Modifiable? (y
or n)
n
Do you want to enable NAT bandwidth Control? (y/n)
y
Please enter your total uplink speed (kbps)
256
The speed you entered is 256
Please enter your total downlink speed (kbps)
1440
The speed you entered is 1440
Do you want to enable TCP MSS control for data packet
y
Please enter TCP Maximum Segment Size
1500
Do you want to save the change to FLASH? (y/n)
y
Configuring DMZ (N, 8)
