100
InnoMedia, Inc
.
All Right Reserved
Appendix C – ADSL Configuration (MTA 6628)
This appendix provides the information for configuring an
ADSL
integrated MTA via the web user
interface or Telnet/Hyper Terminal interface.
Web User Interface
ADSL Link Status
ADSL link status page shows you the ADSL link status. The information refreshes only
when you reboot the system or the MTA is being re-trained. The upstream and downstream
speed depends on the network condition at the time as well as your service subscription.
NOTE
: The information displayed on the page is configurable on the server side.
Table 29. ADSL Link Status
Step
Action
1
Open your web browser and connect to your SIP Device.
2
Click on ADSL, then ADSL Status. The ADSL Link Status page
appears. The information is for read-only.
Figure 34. ADSL Link Status
Configure ATM Settings
The ATM settings have to comply with your ADSL network. It is recommended not to
change the default values if you are not familiar with the various ATM terms and settings.
The MTA allows you to set up 8 virtual channel connections (VCC).
Each VCC has both a
virtual path identifier
(
VPI) and a virtual channel identifier
(VCI).
The PVC Traffic mapping allows you to configure multiple PVCs that have different QoS
characteristics between two end devices.
To configure the ATM settings, follow these steps:
