30
InnoMedia, Inc
.
All Right Reserved
Figure 28. Configuring Profile
Configuring Ports
The Port Configuration screen allows you to configure your SIP Device's User Account
information, call features, and the preferred CODEC. To configure the port settings, follow
these steps:
NOTE
: Some settings, like preferred CODECs, can be pre-configured in the profile. By
changing the CODECs settings on this page will overwrite the setting in the profile.
Table 23. Configuring Ports
Step Action
1
Open your web browser and connect to your SIP Device.
2
Click VoIP, and then Port Configuration.
3
Click the Port number tab to display the port settings.
4
Under Account Information:
Check the Port Enabled option box to enable the port.
Enter the User ID, Password, User Name, and the
Authentication ID in the fields.
Select the port profile from the drop-down box. For
information on how to set the port profile, see
Configuring Profiles section on page 28.
5
Under Call Features:
Select the features you would like to enable by checking
the option boxes. If you enable the Hot Phone feature,
enter the Hot Phone Number in the field.
Select the Speaker Gain and Listen Gain from the drop-
down boxes. The default values for both are “0dB”.
6
Under Preferred CODEC:
Enter the Packetization time
Select the preferred CODEC from the drop-down box.
You can specify up to 6 CODECs based on their
priority levels.
7
Click Save to save your changes and take into effect.
