9
InnoMedia, Inc
.
All Right Reserved
Figure 6. SIP Device Web User Interface - Main Page
Configuring IP Addresses for SIP Device
To configure the IP Address for the SIP Device, follow these steps:
Table 4. Configuring External IP Address
Step Action
1
Open your web browser and connect to your SIP Device at
http://192.168.99.1.
2
Click on IP Network, then Interface Setting.
3
If you choose to use DHCP, then click the check box. Otherwise,
enter your IP address, Subnet Mask, Default Gateway, DNS (if
available), and FQDN (Fully Qualified Domain Name). This
information should be supplied by your ISP or network
administrator.
4
Select the Link Speed based on the device you connected to by
clicking the appropriate radio button. Auto speed enables devices
to automatically exchange information over a link and negotiate
the speed based on the connection to the other end.
5
Select the Link Mode by clicking the appropriate radio button.
Auto duplex enables devices to automatically exchange
information over a link and negotiate the mode based on the
connection to the other end.
6
Click Save & Reboot to save your changes and take into effect, or
click the Reset button to undo your changes.
