72
InnoMedia, Inc
.
All Right Reserved
1: Set DMS Enable/Disable
2: Set DMS Device Type
3: Set DMS Region ID
4: Set DMS Server
5: Set DMS Local Port
6: Set DMS Heartbeat type
7: Set DMS Heartbeat Interval
8: Set DMS Encrpytion Key
w: Write update to Flash
q: Exit DMS config
Choose Option:
p
InnoMedia DMS is Enabled
DMS Server is:172.16.0.25:5200
DMS device type is 1
DMS Heartbeat type is 1
DMS Local port:5200
DMS regionID:1
Choose Option:
Configuring # Character for End of Dial Digit (Cp)
Use the "
Cp
" command to enable or disable # character for end of dial digit. When the end
of dial digit is set, users can press the # key to tell the SIP Device that they are done dialing
the number and the PHONE will start routing the call without waiting for more digits.
SAMPLE:
Cp
Currently # character for end dial digit is enabled for line
1
Currently # character for end dial digit is enabled for line
2
Do you want to change the configuration? [y/n]
y
Do you want to enable # character for line 1? [y/n]
n
Line 1 # character disables.
Do you want to enable # character for line 2? [y/n]
y
Line 2 # character enables.
Do you want to store the changes permanently?[y/n]
y
Configuring Control Parameters (Me)
Use the "
Me
" command to view or change the current control parameters. Please note that
Option 2, SW_UPGRADE feature is not yet supported by this software release.
SAMPLE:
Me
