4
InnoMedia, Inc
.
All Right Reserved
About This Document
Welcome to the InnoMedia SIP Device Administrator’s Guide. The purpose of this manual
is to give system integrators and service operators detailed reference information on
configuring and administering InnoMedia's MTA line of products running the SIP
protocol.
The commands necessary for unit’s configuration and provisioning are covered in this
document for InnoMedia's SIP-based voice CPE. For conciseness, all examples reference
configuration of a 2-port device, but are applicable to the rest of InnoMedia's SIP-based
voice CPE as well.
Any device-specific variances can be found within the appendices of this document.
Therefore, it is advisable to refer to the appendix if the information you require is not
found within the general documentation.
This document has the following chapters:
Chapter 1, SIP Device Internal Port Setup, provides step-by-step instructions for installing
the SIP Device system and setting up the IP addresses of your computer.
Chapter 2, SIP Device Configuration, describes how to configure SIP Device via a web
interface and Telnet/HyperTerminal interface.
Chapter 3, SIP Device Firmware Updates, describes the procedure for uploading SIP
Device Firmware through a web interface, or an external provisioning server to the unit.
Appendix A - HTTP Provisioning for SIP Device, lists the provisioning tags for SIP
devices.
Appendix B - Troubleshooting for 6328-2Re
