41
InnoMedia, Inc
.
All Right Reserved
Enter the Channel Number: (from 1 to 1 )
1
Activate Silence Suppression(y/n)?
y
Send RFC3389 Silence Insertion Descriptor frame(y/n)?
y
Please input the signal DSCP value (decimal):
00
Your new DSCP value :0,0x0
Please input the voice DSCP value (decimal):
00
Your new DSCP value :0,0x0
Please input the other DSCP value (decimal):
00
Your new DSCP value :0,0x0
Please input the LAN traffic DSCP value (decimal):
00
Your new DSCP value :0,0x0
Bullet interval =
30
Please enter interval (0 - 3600 second):
120
Enable pinging the gateway(Currently disabled)? (Y/N)
y
Please use D1->Th->21 to configure T38 Fax Answer Tone
Trigger
Do you want to store the changes permanently?[y/n]
y
Other Local Host Settings Configuration Description
CODEC
= Specify the preferred CODEC to be used by the SIP
Device
Voice Frames Packetization
= Specify time in ms for voice packets. If G723 is selected
as the preferred codec, the default is 30ms.
RTP Port
= Specify the RTP port number that is greater than 10,000.
Silence Suppression
= Select “On/OFF” for silence packet suppression
DSCP value
= Specify the DSCP value (0-7F) for IP packets
Bullet interval
= Specify the time interval in seconds for sending bullets
to keep firewall opened
Pinging Gateway
= Select to allow SIP Device to periodically ping default
GW to determine network connectivity
Change All
= Configure all of the above parameter
s
Specifying the preferred CODEC (Ci ,5 , 1)
Use the “
Ci, 5,1
” command to specify the preferred CODEC to be used by the SIP Device.
Select available CODECs from the list
and separate the CODEC number with a comma.
NOTE:
This configuration here will overwrite the profile settings.
SAMPLE:
Enter the Channel Number: (from 1 to 1 )
1
Num. of Available Codecs = 8
0. PCMU/8000
1. PCMA/8000
2. G729A/8000
3. G723/8000
