43
InnoMedia, Inc
.
All Right Reserved
Please Reboot MTA after new change is written into flash!
Do you want to store the changes permanently?[y/n]
y
Please wait for flash update...
INFO: read from NVS_PRIMARY (0xaed)
INFO: write to NVS_SECONDARY (0xaee)
INFO: write to NVS_PRIMARY (0xaee)
INFO: read from NVS_PRIMARY (0xaee)
FS write: OK.
Please reboot the system
Configuring Jitter Buffer Size (Cj)
Jitter buffers are used to smooth out network introduced jitters and for the system to handle
out-of-sequence packets. However, jitter buffers also introduce delays. SIP Device
supports adaptive jitter buffer based on packet arrival statistics to adjust the jitter buffer
length and delay to accommodate network jitters and minimizes overall delay at the same
time. The "
Cj
" command is used to configure the Initial Delay. The default value is 60ms,
the Maximum Jitter Buffer Length is 400ms, and Minimum Jitter Buffer Length is 0ms.
SAMPLE:
Cj
Jitter Buffer Size: 60 ms
Jitter Buffer Adaptivity: on
Enter Jitter Buffer Size(0-400 ms, 0 disable it)[60]:
90
Turn on Jitter Buffer Adaptivity?[y/n]
y
Save changes permanently?[y/n]
y
Changing your User Name and Password (Cw)
Use the "
Cw
" command to change your User Name and Password. The default User Name
is
Admin
and Password is
password
.
SAMPLE:
Cw
Please input your OLD Password:
********
Please input your NEW Username:
innomedia
Please input your NEW Password:
*********
Please REENTER your NEW Password:
*********
INFO: read from NVS_PRIMARY (0x9fb)
INFO: write to NVS_SECONDARY (0x9fc)
INFO: write to NVS_PRIMARY (0x9fc)
