45
InnoMedia, Inc
.
All Right Reserved
9]X.T
(Profile 2) ***1|[#*][6-9]X|1XXXXXXXXXX|[2-9]XXXXXX|0[0-9][0-
9]X.T
Display Fax parameters (If)
Use the "
If
" command to view about the Fax settings.
SAMPLE:
Your T38 settings are:
ch 1 T38 Fax is disabled
ch 2 T38 Fax is disabled
t38 jitter buffer is 160 ms
t38 T2 is 240 ms
t38 low speed redundancy is 3
t38 high speed redundancy is 1
t38 bit rate is 9600
t38 ECM is on
t38 NSF is cleaned out
t38 T38FaxMaxBuffer is 200
t38 FaxMaxDatagram is 300
Fax setting flag 0,port 18000
Fax is using voice port,it is 18000
t38 variant is Default
Displaying Voice Volume Level (Ig)
Use "
Ig
" command to view the voice volume level for each channel
SAMPLE:
Ig
Current RX volume level for channel 1 = 0 dB
Current TX volume level for channel 1 = 0 dB
Current RX volume level for channel 2 = 0 dB
Current TX volume level for channel 2 = dB
Display Parameters for Jitter Buffer Operation (Ij)
Use "
Ij
" command to view the parameters for jitter buffer operation.
SAMPLE:
Ij
Jitter Buffer Delay = 120
Jitter Buffer is "adaptive"
Displaying the State of All Ports/Lines (Is)
