94
InnoMedia, Inc
.
All Right Reserved
rtpLossPktThresh
snmp notify threshold for rtp packet loss
rtpMinNotifyInterval
Minimum Notify interval (in seconds)
rtpDelayNotifyEnable
Enable/disable snmp notify over delay threshold
rtpJitterNotifyEnable
Enable/disable snmp notify over jitter threshold
rtpLossNotifyEnable
Enable/disable snmp notify over loss threshold
DMS_HBType
HBType for DMS
Prov_POST_Enabled
Enable/disable POST message for prov mode 2, 909 and 9768
HTTP_Prov_variant
0: no digest in GET request, 1: yes
Prov_Enc_Pwd
Change provisioning password
Prov_Server_Name
Configure Provisioning Server
Prov_Interval,Provisioning_Interval,
Repeat_Interval,
Prov_Config_Time,Provisoning_Interv
al
Set Reprovisioning time interval
Enable_Percent_Char_N (N = Channel
number)
Disable (0) or enable (1) percent character for end dial digit per
x (line)
Codecs_Of_Ch_N (N = Channel
number)
Set the Profile ID of a specific channel
Codecs_Of_Ch_N (N= Channel
number)
Set the codec list of a specific channel
Packetization_Time_Of_Ch_N,
PTIME_Of_Ch_N (N = Channel
number)
Set the ptime of a specific channel
ProfileName_N (N = Channel number)
Set the profile Name of a specific Voice Profile.
ProfileID_Of_Ch_N (N = Channel
number)
Set the Profile ID of a specific channel
Enable_Outbound_Proxy_N (N =
Channel number)
Enable or Disable using outbound proxy for a specific Voice
Profile.
Proxy_Server_ID_N, IP_PROXY_N,
SIP_Proxy_addr_N,
VSP_Proxy_Server_ID_N (N =
Channel number)
Setting the SIP Proxy Server IP of a specific Voice Profile.
Packetization_Time_Profile_N,
PTIME_Of_Profile_N (N = Channel
number)
Set the ptime of a specific Voice Profile.
Refer_EndOfThreeway
Enable: both callee can talk after mixer hangup
Disable: terminate all calls when mixer hangup
New provision tag: Refer_EndOfThreeway, 0:disable, 1:enable,
default=1
SIP_P_ACCESS_NETWORK_INFO_
index, where index=1,2,.... max profile
#
Provide the access-type and access-info, related to the serving
access network.
FCS_Enabled
Enable or disable RTP check sum. Default= disabled.
SDP_MediaMatch
Enable or disable Media Match by incrementing the version
number by one to comply with RFC 3264. Default=1
LineStartMode_d
d=channel number, Loop start=0, Ground Start=1. Default=0
WEB_timeout
Configure the timeout for WEB page
SIP_P_ACCESS_NETWORK_INFO_
N (N = Channel number)
sip header for REGISET
