background image

 

40 

InnoMedia, Inc

All Right Reserved 

 

NOTE:

 The configuration for option 1 and 2 in the Ci, 5 menu will overwrite the profile 

settings. 

 

SAMPLE: 

 

Ci 
 

1. Configure Local IP 
2. Set DNS IP(s) 
3. SIP Proxy Server And SIP Domain 
4. Change IP Settings for All 
5. Configure other Local Host settings 
6. Configure Provisioning Server(obsolete) 
7. Configure MTU Size 
9. Configure MTA Web Server Port 

 
0. Set Fax Answer Tone Trigger Flag. (Please try D1->Th->21) 
1. Select CODECs: 
2. Set Voice Frame Packetization Time 
3. Change Voice RTP port 
4. Set Silence Suppression 
5. Set DSCP(Differentiated Services Code Point) value 
6. Set Bullet interval 
7. Enable Pinging Gateway 
8. Change All the above settings 

Enter the Channel Number: (from 1 to 1 )

1

 

 Num. of Available Codecs = 8 
 
 0.     PCMU/8000 
 1.     PCMA/8000 
 2.     G729A/8000 
 3.     G723/8000 
 4.     G726-32/8000 
 5.     G728/8000 
 6.     G729/8000 
 7.     G722/8000 
Please enter selections: (a,b,c,d....):

2,6 

 
Do you want to store the changes permanently?[y/n] 

INFO: read from NVS_PRIMARY (0xae8) 
INFO: write to NVS_SECONDARY (0xae9) 
INFO: write to NVS_PRIMARY (0xae9) 
FS write: OK. 
Enter the Channel Number: (from 1 to 1 )

 
Please input the packetization (5-200 ms): 

20 

Please input the Voice RTP port #(even number >=10000):   

10200 

 
Your new Voice RTP port #:10200 
Channel 1 Silence Suppression is ON, 
    send RFC3389 Silence Insertion Descriptor frame?: No 
----------------------------------------------------- 

Summary of Contents for 6308







































































































Reviews: