48
InnoMedia, Inc
.
All Right Reserved
Enter l to show configure link setting
1
================================
= PPPoE CONFIGURATION =
================================
PPPoE : DISABLED
Service ID: ADSL_Test
User ID: test
Autoconnect = ENABLED
IdleTimeOut = DISABLED
Authentication : CHAP
LocalIPAddr 172.16.0.76
PPPSubNet 255.255.255.255
MTU size = 1450
LCP echo period = 10 (sec)
================================
Option 1)Configure 2)Dial 3)HangUp 4)Status 5)Quit:
4
Not Connected
Option 1)Configure 2)Dial 3)HangUp 4)Status 5)Quit:
1
PPPoE [DISABLE] 1) Enable 2)Disable : Enable
Service ID [] 9=NULL:
NewUserID [[email protected]]:
NewPassword [********]:
admin123
AutoConnect [YES] 1) YES 2)NO : YES (
enter 1
)
Idle TimeOut Period (min) [Disable] 0~999 0=Disable :0 (
enter
0
)
Authentication [PAP] 1) PAP 2)CHAP :PAP (
enter 1
)
PPP MTU Size [-1]: 1500
LCP echo timeout value [255] (sec): 180
Do you want to store the changes permanently?[y/N]?
y
PPPoE configuration Description for ISP
Service ID
= Specifies the service for the PPPoE connection. Your ISP
should provide you with the Service ID. If not, enter
NULL.
User ID
= Enter the user name for the PPPoE connection.
User Password
= Enter the password for the PPPoE connection
AutoConnect
= If AutoConnect were enabled, system will automatically
connect to your ISP when the system boots up.
IdleTimeOut
= Specifies the number of minutes that the connection is
idle before the device terminates the connection. A value
of 0 disables this function and the connection is never
terminated.
Authentication
= Select the authentication method: Password
Authentication Protocol (PAP) or Challenge Handshake
Authentication Protocol (CHAP). CHAP provides more
security than PAP.
PPP MTU Size
= The maximum allowable packet
size
(
MTU
) for PPP
connection.
