Multitron Pro - Incubation Shaker
Setup and function
2013-02-19
Page
71
of
185
Fig. 38
Label "outside"
The curtain is made of transparent PVC sheeting, 0.75 mm thick.
There are four snap fasteners on the upper front edge of the
incubation chamber to attach the curtain.
The lower edge of the curtain has 8 slits to facilitate handling of the
tray.
The curtain is marked "outside" so that it can be fitted correctly.
The transparent curtain is attached to the upper front edge of the
housing by means of the 4 snap fasteners.
The curtain prevents large amounts of CO
2
escaping when the
door is opened.
NOTICE!
The safety curtain keeps the CO
2
gas inside the
incubation chamber:
approx. 60% on opening the door
approx. 40% on pulling out the tray
There are two types of safety curtain:
Fig. 39
CO
2
– closed
Fig. 40
CO
2
+ humidification – with 8 circular holes (Ø 45 mm) in the
upper section
