Multitron Pro - Incubation Shaker
Operation
2013-02-19
Page
111
of
185
4.
Press ON/OFF key to switch on Time 1.
Timer 2 is switched off.
5.
Press option key to select parameter.
6.
Press SET key.
7.
Press PLUS or MINUS key to set setpoint.
8.
Press ON/OFF key to switch parameter on.
NOTICE!
For a single changeover, the timer must be
switched off in Phase 2!
9.
Press option key to confirm programming.
The shaker now operates until end of preset time in operating
mode of Phase 1.
Function symbol TIMER lights blue and Phase 1 blinks blue.
After end of Time 1, operating mode of Phase 2 is active.
Function symbol TIMER does not light.
Operating mode Phase 2 blinks blue.
The unit is operating with operation mode of Phase 2 until the unit
is switched off manually.