Multitron Pro - Incubation Shaker
Interferences
Page
166
of
185
2013-02-19
9.5 Returning for repair
The operator must return the equipment or the faulty component
part(s) to the manufacturer if, after consulting the service
department of the local dealer or the manufacturer, on-site
diagnosis and/or repair is not possible.
The following must be observed if this is the case:
The equipment or the component part which is to be repaired
must be entirely decontaminated before sending to the
manufacturer.
The operator is obliged to firstly fill in and sign a
decontamination agreement and decontamination form and
either send it together with the written request for the repair
work to the licensed dealer before returning the faulty
equipment to the manufacturer or,
at the latest
, together with
the faulty equipment on return to the manufacturer.
These forms can be obtained from the licensed dealer or the
manufacturer, contact details can be found on page 2 of this
manual.
