Multitron Pro - Incubation Shaker
Installation and initial operation
Page
94
of
185
2013-02-19
Fig. 66
4.
Remove the bearing sleeve and self-aligning ball bearing
(highlighted in yellow) from the adjustable axle.
Fig. 67
5.
Remove the 4 Allen screws from the adjustable throw axle.
Fig. 68
6.
Insert the throw axle into the desired throw position.
12.5 mm
25 mm
50 mm
The marking on the edge of the throw axle must line up with
the marking on the counterweight. The different throws are
engraved on the counterweight.
7.
Attach the adjustable throw axle to the counterweight using
the 4 Allen screws.
