InfoPrint Color 1824 User Manual Download

Page: 14 / 170

Fully configured model

The following illustration shows the fully configured printer model with a 650-sheet duo drawer:

650-sheet duo drawer (Tray 2)

Multipurpose feeder latch

Multipurpose feeder

Selecting a location for the printer

When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install
any options, leave enough room for them also. It is important to:

•

Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard.

•

Provide a flat, sturdy, and stable surface.

•

Keep the printer:

–

Away from the direct airflow of air conditioners, heaters, or ventilators

–

Free from direct sunlight, humidity extremes, or temperature fluctuations

–

Clean, dry, and free of dust

•

Allow the following recommended amount of space around the printer for proper ventilation:

Learning about the printer

Summary of Contents for Color 1824











































































































































































Search results

Summary of Contents for Color 1824

Reviews:

Related manuals for Color 1824

Brands by name

Popular brands

InfoPrint Color 1824, User Manual

Search results

Summary of Contents for Color 1824

Reviews:

Related manuals for Color 1824

Brands by name

Popular brands