InfoPrint Color 1824 User Manual Download

Page: 53 / 170

Printing specialty documents

Tips on using letterhead

Page orientation is important when printing on letterhead. Use the following table to determine which direction to
load the letterhead:

Source or process

Print side and paper orientation

•

Standard 250-sheet tray

•

Optional 550-sheet tray

•

Simplex (one-sided) printing
from trays

Printed letterhead design is placed faceup. The top edge of the sheet with the logo
is placed at the front of the tray.

Duplex (two-sided) printing from
trays

Printed letterhead design is placed facedown. The top edge of the sheet with the
logo is placed at the back of the tray.

Note:

Check with the manufacturer or vendor to determine whether the chosen preprinted letterhead is acceptable for

laser printers.

Printing

Summary of Contents for Color 1824











































































































































































Search results

Summary of Contents for Color 1824

Reviews:

Related manuals for Color 1824

Brands by name

Popular brands

InfoPrint Color 1824, User Manual

Search results

Summary of Contents for Color 1824

Reviews:

Related manuals for Color 1824

Brands by name

Popular brands