InfoPrint Color 1824 User Manual Download

Page: 79 / 170

Network Setup Page menu

Menu item

Description

Network Setup Page

Prints a report containing information about the network settings, such as
TCP/IP address information

Notes:

•

This menu item appears only for printers with a network print server
installed.

•

The page prints when this item is selected.

Profile List menu

Menu item

Description

Print profiles

Prints a list of profiles stored in the printer

Note:

The page prints when this item is selected.

Print Fonts menu

Menu item

Description

Print Fonts

PCL Fonts

PostScript Fonts

PPDS Fonts

Prints a sample of all the fonts available for the printer language currently set
in the printer

Note:

A separate list is available for PCL, PostScript, and PPDS emulations.

Print Directory menu

Menu item

Description

Print Directory

Prints a list of all the resources stored on an optional flash memory card

Notes:

•

The optional flash memory or printer hard disk must be installed correctly
and working properly.

•

The page prints when this item is selected.

Print Defects menu

Menu item

Description

Print Defects

Prints a diagnostic list of problems

Notes:

•

The page prints when this item is selected.

•

The list should be printed on letter- or A4-size paper.

Understanding printer menus

Summary of Contents for Color 1824











































































































































































Search results

Summary of Contents for Color 1824

Reviews:

Related manuals for Color 1824

Brands by name

Popular brands

InfoPrint Color 1824, User Manual

Search results

Summary of Contents for Color 1824

Reviews:

Related manuals for Color 1824

Brands by name

Popular brands