InfoPrint Color 1824, User Manual

Page: 142 / 170

4
Release both buttons when
Performing Self Test
appears.
The printer performs its power-on sequence, and then
Config Menu
appears.
5
Press the arrow buttons until
Prt Quality Pgs
appears, and then press .
The pages are formatted.
Printing Quality Test Pages
appears, and then the pages print. The message
remains on the display until all the pages print.
6
After the print quality test pages print, press the arrow buttons until
Exit Config Menu
appears, and then
press .
Blank pages
The printer may need to be serviced. For more information, contact Customer Support.
Characters have jagged or uneven edges
These are possible solutions. Try one or more of the following:
C
HECK THE PRINT QUALITY SETTINGS
•
Change the Print Resolution setting in the Quality menu to 600 dpi, 1200 Image Q, 1200 dpi, or 2400 Image Q.
•
Enable Enhance Fine Lines in the Quality menu.
M
AKE SURE DOWNLOADED FONTS ARE SUPPORTED
If you are using downloaded fonts, then verify that the fonts are supported by the printer, the host computer, and
the software program.
Troubleshooting
140