InfoPrint Color 1824 User Manual Download

Page: 105 / 170

56 Standard USB port disabled

Try one or more of the following:

•

Press

to clear the message and continue printing.

The printer discards any data received through the USB port.

•

Make sure the USB port is not set to Disabled.

58 Too many flash options installed

Too many optional flash memory cards or too many optional firmware cards are installed on the printer.

Try one or more of the following:

•

Press

to clear the message and continue printing.

•

Remove extra flash options:

Turn the printer off.

Unplug the power cord from the wall outlet.

Remove extra flash options.

Connect the power cord to a properly grounded outlet.

Turn the printer back on.

58 Too many trays attached

Turn the printer off.

Unplug the power cord from the wall outlet.

Remove the additional trays.

Connect the power cord to a properly grounded outlet.

Turn the printer back on.

59 Incompatible tray <x>

Remove the specified tray.

82 Replace waste toner box

Replace the waste toner bottle. For more information, see “Replacing the waste toner bottle” on page 108.

82.yy Waste toner box missing

Replace the waste toner bottle, and then press

to clear the message and continue printing.

82.yy Waste toner box nearly full

Press

to clear the message and continue printing.

88.yy <color> Cartridge is low

Press

to clear the message and continue printing.

Understanding printer messages

103

Summary of Contents for Color 1824











































































































































































Search results

Summary of Contents for Color 1824

Reviews:

Related manuals for Color 1824

Brands by name

Popular brands

InfoPrint Color 1824, User Manual

Search results

Summary of Contents for Color 1824

Reviews:

Related manuals for Color 1824

Brands by name

Popular brands