InfoPrint Color 1824 User Manual Download

Page: 83 / 170

Menu item

Description

Mac Binary PS

Off
Auto

Sets the printer to process Macintosh binary PostScript print jobs

Notes:

•

Auto is the factory default setting.

•

The Off setting filters print jobs using the standard protocol.

•

The On setting processes raw binary PostScript print jobs.

ENA Address

Sets the network address information for an external print server that is attached
to the printer using a USB cable

Note:

This menu item is available only if the printer is attached to an external printer

server through the USB port.

ENA Netmask

Sets the netmask information for an external print server that is attached to the
printer using a USB cable

Note:

This menu item is available only if the printer is attached to an external print

server through the USB port.

ENA Gateway

Sets the gateway information for an external print server that is attached to the
printer using a USB cable

Note:

This menu item is available only if the printer is attached to an external print

server through the USB port.

Understanding printer menus

Summary of Contents for Color 1824











































































































































































Search results

Summary of Contents for Color 1824

Reviews:

Related manuals for Color 1824

Brands by name

Popular brands

InfoPrint Color 1824, User Manual

Search results

Summary of Contents for Color 1824

Reviews:

Related manuals for Color 1824

Brands by name

Popular brands