InfoPrint Color 1824 User Manual Download

Page: 16 / 170

Understanding the printer control panel

Control panel item

Description

Display

Shows messages that communicate the status of the printer

Select

Press

to initiate action on a menu item.

Indicator light

Indicates the printer status:

•

Off

—The power is off.

•

Blinking green

—The printer is warming up, processing data, or printing.

•

Solid green

—The printer is on, but idle.

•

Blinking red

—Operator intervention is needed.

Stop/Cancel

Stops all printer activity

A list of options is offered once

Stopped

appears on the display.

Navigation buttons Press or to scroll through menu lists.

Back

Returns the display to the previous screen

Opens the menu index

Note:

The menus are available only when the printer is in the

Ready

state.

Learning about the printer

Summary of Contents for Color 1824











































































































































































Search results

Summary of Contents for Color 1824

Reviews:

Related manuals for Color 1824

Brands by name

Popular brands

InfoPrint Color 1824, User Manual

Search results

Summary of Contents for Color 1824

Reviews:

Related manuals for Color 1824

Brands by name

Popular brands