InfoPrint Color 1824 User Manual Download

Page: 149 / 170

Skewed print

HECK

THE

PAPER

GUIDES

Move the guides in the tray to the correct positions for the paper size loaded.

HECK

THE

PAPER

Make sure you are using paper that meets the printer specifications.

Solid color pages

The printer may need to be serviced. For more information, contact Customer Support.

Toner fog or background shading appears on the page

These are possible solutions. Try one or more of the following:

IMAGING

KIT

MAY

WORN

DEFECTIVE

Replace the imaging kit.

Note:

The printer has two types of imaging kits: a black and color imaging kit, and a black imaging kit. The black

and color imaging kit contains cyan, magenta, yellow, and black. The black imaging kit contains black only.

THERE

TONER

THE

PAPER

PATH

Contact Customer Support.

Toner rubs off

These are possible solutions. Try one or more of the following:

Troubleshooting

147

Summary of Contents for Color 1824











































































































































































Search results

Summary of Contents for Color 1824

Reviews:

Related manuals for Color 1824

Brands by name

Popular brands

InfoPrint Color 1824, User Manual

Search results

Summary of Contents for Color 1824

Reviews:

Related manuals for Color 1824

Brands by name

Popular brands