InfoPrint Color 1824, User Manual

Page: 138 / 170

Tray linking does not work
These are possible solutions. Try one or more of the following:
L
OAD THE SAME SIZE AND TYPE OF PAPER
•
Load the same size and type of paper in each tray to be linked.
•
Move the paper guides to the correct positions for the paper size loaded in each tray.
U
SE THE SAME
P
APER
S
IZE AND
P
APER
T
YPE SETTINGS
•
Print a menu settings page and compare the settings for each tray.
•
If necessary, adjust the settings from the Paper Size/Type menu.
Note: The multipurpose feeder does not automatically sense the paper size. You must set the size from the Paper
Size/Type menu.
Large jobs do not collate
These are possible solutions. Try one or more of the following:
M
AKE SURE
C
OLLATE IS SET TO
O
N
From the printer control panel Finishing menu, Print Properties, or the Print dialog, set Collate to On.
Note: Setting Collate to Off in the software overrides the setting in the Finishing menu.
R
EDUCE THE COMPLEXITY OF THE PRINT JOB
Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity
of images, and the number of pages in the job.
M
AKE SURE THE PRINTER HAS ENOUGH MEMORY
Add printer memory.
Unexpected page breaks occur
Increase the Print Timeout value:
1
From the printer control panel, press .
2
Press the arrow buttons until
Settings
appears, and then press .
3
Press the arrow buttons until
General Settings
appears, and then press .
4
Press the arrow buttons until
Timeouts
appears, and then press .
5
Press the arrow buttons until
Print Timeout
appears, and then press .
6
Press the arrow buttons until the desired value appears, and then press .
Troubleshooting
136