InfoPrint Color 1824 User Manual Download

Page: 98 / 170

Understanding printer messages

List of status and error messages

Busy

Wait for the message to clear.

Calibrating

The printer is adjusting the color. Wait for the message to clear.

Close door

Close the upper and lower doors.

Check Config ID

The printer configuration ID is invalid. Contact Customer Support.

Check Model Name

Set a valid model name.

Check Serial Num

Set a valid serial number.

<color> Low

Replace the toner cartridge, and then wait for the message to clear.

Defragmenting Flash

The printer is performing the defragmentation operation on flash memory. Wait for the message to clear.

Warning—Potential Damage:

Do not turn the printer off while this message appears on the display.

Flushing buffer

Wait for the message to clear.

Formatting Flash

Wait for the message to clear.

Warning—Potential Damage:

Do not turn the printer off while this message appears on the display.

Understanding printer messages

Summary of Contents for Color 1824











































































































































































Search results

Summary of Contents for Color 1824

Reviews:

Related manuals for Color 1824

Brands by name

Popular brands

InfoPrint Color 1824, User Manual

Search results

Summary of Contents for Color 1824

Reviews:

Related manuals for Color 1824

Brands by name

Popular brands