InfoPrint Color 1824 User Manual Download

Page: 11 / 170

Safety information

Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible.

Do not place or use this product near water or wet locations.

CAUTION—POTENTIAL INJURY:

This product uses a laser. Use of controls or adjustments or performance of

procedures other than those specified herein may result in hazardous radiation exposure.

This product uses a printing process that heats the print media, and the heat may cause the media to release emissions.
You must understand the section in your operating instructions that discusses the guidelines for selecting print media
to avoid the possibility of harmful emissions.

CAUTION—HOT SURFACE:

The inside of the printer might be hot. To reduce the risk of injury from a hot

component, allow the surface to cool before touching.

CAUTION—POTENTIAL INJURY:

The printer weight is greater than 18 kg (40 lb) and requires two or more

trained personnel to move it safely.

CAUTION—POTENTIAL INJURY:

Before moving the printer, follow these guidelines to avoid personal injury

or printer damage:

•

Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.

•

Disconnect all cords and cables from the printer before moving it.

•

Lift the printer off of the optional drawer and set it aside instead of trying to lift the drawer and printer at the
same time.

Note:

Use the handholds located on both sides of the printer to lift it off the optional drawer.

Use only the power cord provided with this product or the manufacturer's authorized replacement.

Use only the telecommunications (RJ-11) cord provided with this product or a 26 AWG or larger replacement when
connecting this product to the public switched telephone network.

CAUTION—SHOCK HAZARD:

If you are accessing the system board or installing optional hardware or memory

devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the
wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,
and unplug any cables going into the printer.

CAUTION—SHOCK HAZARD:

Make sure that all external connections (such as Ethernet and telephone system

connections) are properly installed in their marked plug-in ports.

This product is designed, tested, and approved to meet strict global safety standards with the use of specific
manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not
responsible for the use of other replacement parts.

CAUTION—POTENTIAL INJURY:

Do not twist, bind, crush, or place heavy objects on the power cord. Do not

subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture
and walls. If the power cord is misused, a risk of fire or electrical shock results. Inspect the power cord regularly
for signs of misuse. Remove the power cord from the electrical outlet before inspecting it.

Safety information