InfoPrint Color 1824 User Manual Download

Page: 42 / 170

Grasp the extension, and pull it straight out until it is fully extended.

Prepare the paper for loading.

•

Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper.
Straighten the edges on a level surface.

•

Hold transparencies by the edges and fan them. Straighten the edges on a level surface.

Note:

Avoid touching the print side of transparencies. Be careful not to scratch them.

•

Flex a stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on a level
surface.

Locate the stack height limiter and tab.

Note:

Do not exceed the maximum stack height by forcing paper under the stack height limiter.

Tab

Stack height limiter

Loading paper and specialty media

Summary of Contents for Color 1824











































































































































































Search results

Summary of Contents for Color 1824

Reviews:

Related manuals for Color 1824

Brands by name

Popular brands

InfoPrint Color 1824, User Manual

Search results

Summary of Contents for Color 1824

Reviews:

Related manuals for Color 1824

Brands by name

Popular brands