Inficon Pernicka 700H CHLD Translation Of The Original Operating Instructions Download Page 17

Page: 17 / 100

INFICON

Shipment, Transport, Storage | 3

Pernicka-700H-CHLD-Operating-instructions-jin76aen1-04-(1911)

17 / 100

3.1.2 Unpack the compressor

CAUTION

Danger of injury when lifting the heavy cryogenic pump compressor

The cryogenic pump compressor weighs approx. 68 kg and can slip out of your hands.

► Lift and transport the cryogenic pump compressor only with two people.

► To lift get hold below the floor panel.

Carton with cryogenic pump

compressor

Cryogenic pump

compressor

Foam

profile

Open the carton and remove the packaging material.

Carefully lift the compressor out of the carton.

Remove the foam profiles from the compressor.

Move the compressor to its destination.

Summary of Contents for Pernicka 700H CHLD





































































































Search results

Summary of Contents for Pernicka 700H CHLD

Reviews:

Related manuals for Pernicka 700H CHLD

Brands by name

Popular brands

Inficon Pernicka 700H CHLD, Translation Of The Original Operating Instructions

Search results

Summary of Contents for Pernicka 700H CHLD

Reviews:

Related manuals for Pernicka 700H CHLD

Brands by name

Popular brands