Inficon Pernicka 700H CHLD, Translation Of The Original Operating Instructions

Page: 16 / 100

3 | Shipment, Transport, Storage INFICON
16 / 100 Pernicka-700H-CHLD-Operating-instructions-jin76aen1-04-(1911)
6
Loosen the 2 transport straps.
7
To loosen the 2 wedges, pull on the loops.
8
Remove the cross beam from the transport box.
9
Place the 2 wedges in front of the transport box on the floor.
10
Place the front plate on the wedges, creating a ramp.
11
Loosen the brakes on the transport rollers and carefully pull the device out of
the transport box.
CAUTION
Danger of crushing extremities
Feet can be rolled over and crushed.
► Keep feet away from the rollers.
12 Remove the protective film from the device.
13 Remove the foam sheet from the vacuum components and from the monitor.
Foam block
under the test leak
Foam block under
the
Adhesive tape on hand
valve test leak CHLD-Sensor
14
Remove the 2 foam blocks from under the CHLD-Sensor and from under
calibration leak.
15 Remove the adhesive tape from the hand valve of the test leak.
16 Ensure that the hand valve of the test leak is open.
17 Remove all cable ties that secure the cables to the housing.
18 Slide the device to its destination.