Inficon Pernicka 700H CHLD Translation Of The Original Operating Instructions Download Page 89

Page: 89 / 100

INFICON

Decommissioning the device | 9

Pernicka-700H-CHLD-Operating-instructions-jin76aen1-04-(1911)

89 / 100

9.1.2 Separate the purge gas

The sealing elements of the compression fitting, ferrel and clamping ring are intended

to be used only once.

► Use a new ferrel and a new clamping ring for each installation of the metal tube for

the purge gas supply.

Compression fitting for the purge gas connection

Nut

Fig. 60: Separate the purge gas

Using an open-ended wrench hold the nut still and loosen the union nut of the

compression fitting.

Pull the metal line out of the compression fitting.

Summary of Contents for Pernicka 700H CHLD





































































































Search results

Summary of Contents for Pernicka 700H CHLD

Reviews:

Related manuals for Pernicka 700H CHLD

Brands by name

Popular brands

Inficon Pernicka 700H CHLD, Translation Of The Original Operating Instructions

Search results

Summary of Contents for Pernicka 700H CHLD

Reviews:

Related manuals for Pernicka 700H CHLD

Brands by name

Popular brands