![background image](http://html1.mh-extra.com/html/ifm/pdm360ng-series/pdm360ng-series_system-manual_3875026072.webp)
ifm
System Manual
ecomat
mobile
PDM360NG (CR1080, CR1081, CR9042) Target V01
2011-07-28
Configurations
Set up programming system
72
Demo program
Function
CR1051Demo_Real_in_xx.pro
Simple example for entering a REAL value in the PDM.
Figure P01000: Enter and display REAL value
CR1051Demo_Ringlogging_on_flash
_intern_xx.pro
Writes a CVS data block in the internal flash memory when [F3] is
pressed or a CAN message is received on ID 100. The file names can be
freely defined. When the defined memory range is full the recording of the
data starts again.
POUs used:
- WRITE_CSV_8BYTE (
→
page
- SYNC (
→
page
).
Figure P35010: Display of data information
Figure P35020: Display of current data record
Figure P35030: Display of list of 8 data records
CR1051Demo_Ringlogging_on_flash
_pcmcia_xx.pro
Writes a CVS data block on the PCMCIA card when [F3] is pressed or a
CAN message is received on ID 100. The file names can be freely
defined. When the defined memory range is full the recording of the data
starts again.
POUs used:
- WRITE_CSV_8BYTE (
→
page
- OPEN_PCMCIA (
→
),
- SYNC (
→
page
).
Figure P35010: Display of data information
Figure P35020: Display of current data record
Figure P35030: Display of list of 8 data records
CR1051Demo_RW-Parameter_xx.pro
In a list parameters can be selected and changed.
Example with the following POUs:
- READ_PARAMETER_WORD (
→
),
- WRITE_PARAMETER_WORD (
→
page
Figure P35010: List of 20 parameters
_xx = indication of the demo version