manualshive.com logo in svg

IFM PDM360NG Series, System Manual

Share
Download
IFM PDM360NG Series System Manual Download Page 31

ifm

 System Manual 

ecomat

mobile

 PDM360NG (CR1080, CR1081, CR9042) Target V01 

2011-07-28 

Configurations

 

Set device parameters (setup)

 

 

31 

 

Setup: set the real-time clock (RTC) 

7414 

►

  Select the menu item [RTC] in the menu [System Settings]. 

The menu [RTC Settings] appears. 

►

  Select the requested group of 

numbers with [SELECT] or 
[BACKSEL]. 

►

  Increment or decrement the value 

of the selected group of numbers 
with [UP] or [DOWN]. 

►

  Confirm and save the changed 

value with [SAVE]. 

►

  Change to the previous menu 

with [EXIT]. 

 

 

Setup: set the display brightness 

7405 

►

  Select the menu item [BACKLIGHT] in the menu [System Settings]. 

The menu [Backlight Settings] 
appears. 

►

  Select the group of numbers with 

[SELECT]. 

►

  Increment or decrement the 

selected value with [UP] or 
[DOWN]. 

►

  Check the changed display 

brightness with [TEST]. 

►

  Confirm and save the changed 

value with [SAVE]. 

►

  Change to the previous menu 

with [EXIT]. 

NOTE:

  The setup menu is always displayed with a 100 % brightness. 

When you change the setting of the brightness this will only become effective outside the setup menu. 

 

Summary of Contents for PDM360NG Series
















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands