manualshive.com logo in svg

IFM PDM360NG Series, System Manual

Share
Download
IFM PDM360NG Series System Manual Download Page 266

ifm

 System Manual 

ecomat

mobile

 PDM360NG (CR1080, CR1081, CR9042) Target V01 

2011-07-28 

CAN in the PDM360

 

CAN POUs to CANopen

 

 

266 

 

In addition to the prescribed entries, the EDS file contains the definitions for SYNC, guarding, 
emergency and heartbeat. If these objects are not used, the values are set to 0 (preset). But as the 
objects are present in the object directory of the slave at runtime, they are written to in the EDS file. 

The same goes for the entries for the communication and mapping parameters. All 8 possible sub-
indices of the mapping objects 16xx

16

 or 1Axx

16

 are present, but possibly not considered in the sub-

index 0. 

NOTE:

 Bit mapping is not supported by the library! 

 

 

Tab [Default PDO mapping] 

1983 

 

In this tab the assignment between local object directory (OD editor) and PDOs transmitted/received 
by the CANopen slave can be defined. Such an assignment is called "mapping". 

In the object directory entries used (variable OD) the connection to variables of the application is made 
between object index/sub-index. You only have to ensure that the sub-index 0 of an index containing 
more than one sub-index contains the information concerning the number of the sub-indices. 

 

Summary of Contents for PDM360NG Series
















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands