manualshive.com logo in svg

IFM PDM360NG Series, System Manual

Share
Download
IFM PDM360NG Series System Manual Download Page 93

ifm

 System Manual 

ecomat

mobile

 PDM360NG (CR1080, CR1081, CR9042) Target V01 

2011-07-28 

Configurations

 

Device update to new software version

 

 

93 

 

5.10.4 

Device update via USB stick 

9382 

9. 

►

  Remove the cover of the reset key on the rear panel of the PDM. 

10. 

►

  Insert the USB stick with the saved update file into the USB port. 

IMPORTANT:

 

The update file must be in the main directory! 
Only ONE update file is allowed in this directory. 

11. 

►

  Press the following key to start the update: 

 - For the device with encoder: press the rotary button 
 - For the device with scroll key: press the key in the middle 
 - For the device with keys at the bottom: press the left key 

12. 

>  The installation process is running. 

13. 

>  The installation process is finished after some minutes. 

>  Display: request to press the reset key within 180 seconds. 

14. 

►

  Press the reset key. 

15. 

>  The PDM restarts. 

>  Display of the new version of the operating system. 

>  Display of the splash screen. 

> FINISHED 

 

 

Summary of Contents for PDM360NG Series
















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands