IFM PDM360NG Series System Manual Download Page 67

Page: 67 / 463

ifm

System Manual

ecomat

mobile

PDM360NG (CR1080, CR1081, CR9042) Target V01

2011-07-28

Configurations

Set up programming system

►

Highlight the elements which contain only the requested function, in this case e.g.:

NOTE:

In other cases libraries and/or visualisations might be required.

►

Confirm the selection with [OK].

> In our example project the elements selected in the demo project have been added:

POUs: Resources:

►

Insert the program [CR2012] in the main program [PLC_PRG] e.g.:

►

The comments of the POUs and global variables usually contain information on how the individual

elements have to be configured, included or excluded. This information has to be followed.

►

Adapt input and output variables as well as parameters and possible visualisations to your own

conditions.

►

[Project] > [Save] and

[Project] > [Rebuild all].

Summary of Contents for PDM360NG Series
















































































































































































































































































































































































































































































Search results

Summary of Contents for PDM360NG Series

Reviews:

Brands by name

Popular brands

IFM PDM360NG Series, System Manual

Search results

Summary of Contents for PDM360NG Series

Reviews:

Brands by name

Popular brands