ifm
System Manual
ecomat
mobile
PDM360NG (CR1080, CR1081, CR9042) Target V01
2011-07-28
Configurations
Set up programming system
56
Activating the PLC configuration
10079
During the configuration of the programming system (
previous section) automatically also the PLC
configuration was carried out.
The point [PLC Configuration] is reached via the tab [Resources]. Double-click on [PLC Configuration]
to open the corresponding window.
►
Click on the tab [Resources] in CoDeSys:
►
Double-click on [PLC Configuration] in the left column.
> Display of the current PLC configuration (
following figure):
> Based on the configuration the following is available in the program environment for the user:
All important system and error flags
Depending on the application and the application program, these flags must be processed and
evaluated. Access is made via their symbolic names.