![background image](http://html1.mh-extra.com/html/ifm/pdm360ng-series/pdm360ng-series_system-manual_3875026082.webp)
ifm
System Manual
ecomat
mobile
PDM360NG (CR1080, CR1081, CR9042) Target V01
2011-07-28
Configurations
First steps
82
The libraries shown here have the following functions:
Library
Meaning
ifm_CRnnnn_Vxxyyzz.LIB
Device functions:
- set the input operating mode
- set the parameters of the tone generator
- set the display brightness
ifm_PDMng_UTIL_Vxxyyzz.LIB
Help functions:
- process input signals
- manage visualisation pages
- version check
ifm_RawCAN_NT_Vxxyyzz.LIB
Functions for CAN Layer 2
ifm_CANopen_NT_Vxxyyzz.LIB
Functions for CANopen
ifm_J1939_NT_Vxxyyzz.LIB
CAN functions for engine management
ifm_NetVarLib_NT_Vxxyyzz.lib
Manage network variables for CANopen
ifm_PDM360NG_USB_Vxxyyzz.LIB
Manage devices on the USB interface
ifm_PDM360NG_USB_LL_Vxxyyzz.LIB
Help library for
ifm_PDM360NG_USB_Vxxyyzz.LIB
ifm_PDM360NG_linux_syscall_asynch_Vxxyyzz.LIB
Send Linux commands to the system
If further libraries are needed:
►
Request the library overview for this device with the key [Ins] or menu [Insert] > [Additional Library
...].
►
Select the necessary libraries in the window which has opened.
NOTE
The software versions suitable for the selected target must always be used:
PLC configuration (
CRnnnn_Vxxyyzz.CFG
)
and device library (
ifm_CRnnnn_Vxxyyzz.LIB
)
CRnnnn
Vxx: 00...99
yy: 00...99
zz: 00...99
device article number
target version number
release number
patch number
The basic filename (e.g. "
CR1051
") and the software version number "xx" (e.g. "
04
") must always have
the same value! Otherwise, the device passes to the STOP mode.
The values for "yy" (release number) and "zz" (patch number) need
not
match.
IMPORTANT:
the following files must also be loaded:
the internal libraries (created in IEC 1131) required for the project,
the configuration files (
*.CFG
)
and the target files (
*.TRG
).
►
Add the following libraries one after the other if they are not yet integrated in the project:
- Standard library
Standard.Lib
from
C:\...\CoDeSys\Library\
- Device library
CRnnnn_Vxxyyzz.Lib
from
C:\...\CoDeSys\Targets\ifm\Library\ifm_CRnnnn\
►
Save the project with [Ins]+[s].
> The project is now prepared for the PLC program of the application.