IBM HS40 - BladeCenter - 8839, Maintenance And Troubleshooting Manual

Page: 93 / 172

Diagnostic error codes
Note: In the following error codes, if XXX is 000, 195, or 197, do not replace a
FRU.
000 The blade server passed the test.
195 The Esc key was pressed to stop the test.
197 Warning; a hardware failure might not have occurred.
For all error codes, replace the FRU or take the action indicated.
Note: See Chapter 7, “Parts listing, Type 8839,” on page 105 to determine which components should be replaced by
a field service technician.
Error code/symptom FRU/action
001-XXX-000
(Failed core tests)
Processor board
001-XXX-001
(Failed core tests)
Processor board
001-250-000
(Failed processor board ECC)
Processor board
001-250-001
(Failed processor board ECC)
Processor board
005-XXX-000
(Failed video test)
Processor board
030-XXX-000
(Failed internal SCSI interface test)
1. SCSI storage expansion unit
2. System board
035-XXX-099
1. No adapters were found.
2. If adapter is installed re-check connection.
075-XXX-000
(Failed power supply test)
Power supply
089-XXX-001
(Failed microprocessor test)
1. Microprocessor 1
2. System board
089-XXX-002
(Failed optional microprocessor test)
1. Optional microprocessor 2
2. System board
089-XXX-003
(Failed microprocessor test)
1. Microprocessor 3
2. System board
089-XXX-004
(Failed optional microprocessor test)
1. Optional microprocessor 4
2. System board
165-060-000 (Service Processor: ASM may
be busy)
1. Rerun the diagnostic test.
2. Fix other error conditions that may be keeping ASM busy. Refer to
the error log and diagnostic panel.
3. Power down the blade server, and reseat it in the chassis.
4. System board.
Chapter 6. Symptom-to-FRU index
83