IBM HS40 - BladeCenter - 8839, Maintenance And Troubleshooting Manual

Page: 35 / 172

SEL Manager main window
The main window of the SEL Manager provides access to all the features of the
add-in through a series of menus. Each menu item supports an accelerator key,
which is indicated by an underlined letter in VGA mode or a highlighted letter in text
mode.
The SEL Manager main window is based on a multi-column format. All SEL entries
are displayed in this window, one system event per row. Each column can be sorted
by clicking on the column heading. The event number is tied to the particular event
even if another column sorts the list. The F4 key shifts the event columns left, while
the F5 key shifts the event columns right.
Application Framework Help subsystem
In addition to the main window, the application framework (AF) also provides a help
subsystem that is used by both the AF and each add-in included with the SSU. The
help subsystem includes three windows: the Help Display Window, the Help
Contents Window, and the Help Search Window.
The Help Display Window is accessible through the Help button on the AF main
window or via the F1 accelerator key (to provide context-sensitive help). The Help
Display Window displays information about a help topic.
Running the SEL Viewer
You can run the SSU SEL Viewer from the Resource CD that comes with the blade
server. The latest SSU utility image can be downloaded from the IBM Support Web
site at http://www.ibm.com/eserver/support/. If you download the latest image of the
SSU utility, complete the following steps:
1. Create diskette of the image.
2. Start your blade server with the diskette.
3. The SSU will launch once the setup is complete.
Diagnostic programs and error messages
The server diagnostic programs are stored in ROM on the processor board. These
programs are the primary method of testing the major components of the blade
server.
Diagnostic error messages indicate that a problem exists; they are not intended to
be used to identify a failing part. Troubleshooting and servicing of complex
problems that are indicated by error messages should be performed by trained
service personnel.
Sometimes the first error to occur causes additional errors. In this case, the blade
server displays more than one error message. Always follow the suggested action
instructions for the first error message that appears.
The following sections contain the error messages that might appear in the detailed
test log and summary log when the diagnostic programs are run.
Chapter 3. Diagnostics
25